Jaguar Rearview Side Mirror Puddle lights

Jaguar Rearview Side Mirror Puddle Lights, Fit for Jaguar XE/XF/XFL/XFR/XJL/XK, etc.  It includes a set of left and right LED side puddle projector welcome lights, with non-fading glass logos. Easy to install and waterproof. The projection logo will give you a surprise and be eye-catching.

Features:

1. Compatibility: JAGUAR XE 2017-2019/JAGUAR XF 2009-2023/JAGUAR XFL 2017-2025/JAGUAR XFR 2010-2015/JAGUAR XJL 2010-2019/JAGUAR XK 2006-2014/JAGUAR XEL 2021-2025.
2. The products include a set of left and right LED side mirror puddle lights with projection for your Jaguar XE/XF/XFL/XFR/XJL/XK. Please make sure your car can fit before purchase. If not sure, you can check your original side mirror lights or contact us ( Email: support@addcarlights.com or WhatsApp: 86-18022372691)
3. Non-fading quartz glass projection logo, there are two no-fading color glass logo slides (driver and passenger side), it will keep bright and clear, buy one time and use it long time.
4. There is Sealed housing to help prevent water intrusion, and it illuminates the ground by the vehicle, helping to prevent you from stepping into a puddle, snow, or other debris. waterproof Level: IP67, better waterproof effect, the projection angle can be adjusted by using the small tool which sends

Installation Guide:

Step 1: Remove the lens and insert four fingers into the back of the lens from the outside. (The more contact surface between the four fingers and the lens, the better to prevent the lens from breaking. Using moderate force, pull outwards to disconnect the two power cables from the lens.)

Step 2: Take out the original puddle light and insert a flat-blade screwdriver into the small hole.(Hold the original puddle light elastic buckle firmly, and press down or pull down the light body meanwhile)

Step 3: Unplug the original car plug and the original car puddle light, and connect our rearview mirror welcome light. (You can use electrical tape to wrap both ends of the adapter cable to prevent it from falling off.)

Step 4: Install the rearview mirror welcome light back to the original car, the logo angle can be adjusted 360° with the small tool. Connect the two power cords of the lens, restore the lens installation, and the installation is complete.

Welcome you to visit the Installation guide to see the installation video.