Skip to content
Toyota projector lights are designed with upgraded quartz glass film and Osram LED chips. The Toyota Puddle lights logo projector is clearer and brighter than general car door lights, removes most blue/yellow edges, and there are different logo images for options, including Toyota Camry door lights. It supports adjustable angles. We provide a one-year warranty, and free shipping is available for most countries.
Single-Lens Logo Light
Toyota Light Carpet Pattern Door Lights
Feature:
- UPGRADE GLASS DOOR LIGHTS – Upgraded glass chips can get higher definition and higher brightness projection. Bright lighting output, low power consumption. When the door is opened, the LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
- EASY INSTALLATION – It only takes about five minutes to finish installation. No drilling, no wiring, and no harm to your car. Easy to install and show your special scene at night.
- HIGH-QUALITY SERVICE – We only make high-quality LED car bulbs. We provide a 1-year warranty. If you have a problem with the product, please feel free to contact us.
- Remove Blue/Yellow edge – Using high brightness OSRAM LED chip, 12V 5W power, very pure light, remove over 90% blue/yellow edge, and no light fade after a long time of use.
- PACKAGE INCLUDED – 2pcs TOYOTA door Lights. Note: make sure your car has the original door light at first when you want these LED logo lights for replacement lights.
Toyota Door Light Compatible Models
This plug-and-play door logo light fits the Toyota models and years listed below. Please check your model and year before ordering.
Swipe left/right to view the full table →
| Cars / Sedans | Avalon 2005-2026, Camry 2006-2026, Corolla 2007-2026, Crown 1999-2018, Mark X 2009-2026, Majesta 2009-2013, Reiz 2005-2017, Century 1997-2018 |
|---|---|
| SUV / Off-road | Land Cruiser 2007-2024, Prado 2010-2026, Highlander 2001-2026 (not for 2014), 4Runner 2010-2026, Sequoia 2007-2026, Harrier 2014-2019, Fortuner 2015-2017 |
| MPV / Van | Sienna 2010-2026, Previa 2006-2016, Alphard 2011-2019, Vellfire 2015-2019, Wish 2009-2016, Verso 2009-2017, Mark X Zio 2007-2013 |
| Hybrid / Other | Prius 2005-2026, SAI 2009-2018, Venza 2008-2018, Venza 2021 |
| Sports / Pickup | GT86 2013-2019, Tundra 2006-2026 |
Plug-and-play door logo lights only fit Toyota vehicles with original door courtesy lights or matching factory connectors. If your vehicle does not have original door lights, you can choose the punch-hole version instead. If you are not sure, please contact us before ordering.
Toyota Door Light Pattern Options
Choose between the classic Single-Lens Logo Light and the newer Light Carpet Style. Both Single-Lens Logo Light and Light Carpet Style are plug-and-play replacement door lights for Toyota vehicles with original door courtesy lights or matching factory connectors.
Single-Lens Logo Light with OSRAM LED Chips
This classic style is a popular choice for many Toyota owners. It uses OSRAM LED chips for a clear and bright logo projection, while reducing most blue and yellow edges.
You can install it on both front and rear doors. If your original door light position is slightly tilted, this light is a good choice because the logo direction can be adjusted.
Light Carpet Style – Wider Two-Pattern Projection
Choose this version if you want a wider projection area. Each light shows two patterns at the same time: a Toyota logo near the door and a wider carpet light pattern on the ground.
The projection is clear and bright, with most blue and yellow edges reduced. It is available in four pattern options and is recommended for front doors.
If your Toyota does not have original door lights, you can choose the Punch hole version. Please note that the Punch hole version only supports Style A to Style L logo patterns.
Single-Lens Logo Light
Single-Lens Logo Light works for Toyota vehicles with original door courtesy lights or matching factory connectors. If your door light position is slightly tilted, choose this light because the projection direction can be adjusted.
Light Carpet Style
The Light Carpet Style shows two patterns at the same time: a Toyota logo near the door and a long carpet light pattern on the ground. It is recommended for front doors.
For Light Carpet Style, the 4 carpet patterns shown above can be made with different Toyota model logos. Please leave your vehicle logo and pattern number in the checkout note box before ordering.
Swipe left/right to view the full table →
| Available Vehicle Logos | Toyota, Camry, Highlander, Avalon, Crown, Granvia, Reiz, Sienna |
|---|---|
| Available Carpet Patterns | Pattern 1, Pattern 2, Pattern 3, Pattern 4 |
| Recommended Doors | Front doors are recommended for the Light Carpet Style. |
Toyota door lights custom logo
If your Toyota model is listed above and you need a new logo, image, wording, photo, or pattern, we can help customize your door lights.
We offer custom service for universal door lights, plug-and-play door lights, and non-fading door lights. Custom patterns can make your car more personal or bring a small surprise to daily use.
For more details, please visit our custom door lights service page.
Shipping
Free shipping is available for any order over US$30. We process orders from Monday to Saturday. Orders are usually processed within 2 business days and shipped out the next day after processing. We do not ship on Sundays or holidays.
Warranty service
Single-Lens Logo Light and Punch hole version come with a one-year quality warranty. Light Carpet Style comes with a 6-month warranty. The warranty does not cover human damage or other subjective factors.
Customized products are not covered by the refund policy if there is no quality issue or factory problem. Please confirm the logo pattern, size, and car model before placing your order.
If you have any questions, please contact our support team. We will do our best to help.
